2 SETTING UP NETWORK SERVER
14 In the Class of new object list, select “Print Server” and click [OK]. The Create Print Server dialog box appears.
15 Enter the print server name, check the “Define additional proper- ties” option and click [Create].
The print server name must be “MFP_[NIC Serial Number]”. You can find the Unit Serial Number of the equipment on the NIC Configuration list that can be printed from the control panel.
16 Display the Assignments window and click [Add]. The Select Object dialog box appears.
17 Select a created printer and click [OK].
18 Click [OK] to close Assignments window for the print server. The print server is created.
Setting up the NetWare in NDPS mode
This equipment supports printing over NetWare 5.1 / 6.0 / 6.5 networks running either the TCP/ IP protocols or the IPX protocol. For pure IP printing, this equipment takes advantage of features in NDPS (Novell Distributed Print Services).
An administrator can use either Novell Printer Gateway or TOSHIBA NDPS Gateway to set up the NetWare server in NDPS mode.
P.36 “Setting up NDPS using Novell printer gateway”
Setting up a NetWare environment correctly requires the presence and active cooperation of the Novell network administrator. You must have administrator privileges on the network to create new NDPS objects.
Setting up NDPS using Novell printer gateway
NDPS is not like the earlier
Before configuring the NetWare file server in NDPS mode, please confirm followings:
yFor NetWare 5.1, the Support Pack 7 and Novell Gateway version 2.1.6 or later with ndps3sp2c are installed.
yFor NetWare 6.5, the Support Pack 2 and Novell Gateway version 3.00 or later with ndps3sp2c are installed.
yMake sure you have a valid IP address for this equipment and for any computers that will print to it.
yIn the equipment setup, enable TCP/IP and enter the IP address, Subnet mask, and Gate- way address for this equipment.
