Cannot ping this equipment | Toshiba GA-1190 manual

Cannot ping this equipment

Problem description

You can check if this equipment is correctly connected to a network by executing a ping com- mand from a computer.

If this equipment does not respond when you ping it, there is a problem either with the network configuration or with device operation.

The following checklist helps you identify the source of the error and directs you where you can find more information about solving it.

No.	Check Item	Yes	No	Countermeasure

1	Confirm that the TCP/IP	Next Step		The networking section of your
	protocol suite is installed on	Next Step	Ö	operating system documentation.
	protocol suite is installed on	Ø	Ö	operating system documentation.
	the client computer.	Ø
	the client computer.

2	Look at the NIC configura-			Enter the correct TCP/IP settings.
	tion page and confirm the
	TCP/IP settings are correct.	Next Step
	Is the IP Address entered	Next Step	Ö
	Is the IP Address entered	Ø	Ö
	and valid? Are the Gateway	Ø
	and valid? Are the Gateway
	and Subnet settings cor-
	rect?

3	Reboot this equipment.			The settings are not binding, con-
	Check the NIC Configura-	Next Step	Ö	tact your service representative.
	tion page that prints out. Are	Ø	Ö
	tion page that prints out. Are	Ø
	the TCP/IP settings correct?

4	Try to ping this equipment		Next Step
	again. Did this equipment	End	Next Step
	again. Did this equipment	End	Ø
	respond to the ping?		Ø
	respond to the ping?

5	Can you ping this equip-			Contact your local network spe-
	ment from any other com-			cialist for a valid IP address for
	puter within the same	Next Step		this equipment.
	network? If not, this equip-	Next Step	Ö
	network? If not, this equip-	Ø	Ö
	ment might have an IP	Ø
	ment might have an IP
	Address that is out of range
	or invalid.

6	Can you ping to another			Check the computer’s protocol
	computer within the same	Next Step	Ö	settings to make sure the gate-
	network?	Ø	Ö	way and subnet settings are cor-
	network?	Ø		way and subnet settings are cor-
				rect.

7	If you have customized the			The NIC is faulty or improperly
	device name, you can			installed. Contact your service
	check if the NIC is func-			representative.
	tional by restoring the
	default settings. When this	Next Step	Ö
	equipment automatically	Ø	Ö
	equipment automatically	Ø
	reboots and a NIC Configu-
	ration page prints, does the
	device name include the
	NIC’s Unit Serial Number?

Equipment Detection and Printing Check 53

Image 55

Toshiba GA-1190 manual Cannot ping this equipment

Contents

GA-1190 Page Preface Setup Guide for Printing Functions Printing Guide Grant of License Software License AgreementTerm General Disclaimer of WarrantyLimitation of Liability Government Restricted Rights Facsimile functions Before Reading This ManualLineup of our manuals Basic functions Scanning functions TopAccess Trademarks How to read this manual Symbols in this manual Contents Contents Setup Flow for Fax Features Setup Flow for Printing Features Unix Overview for Network Configuration Connecting to the local area network over IPX/SPX Connecting to the local area network over TCP/IPPrinting Features Connecting to the Internet Connecting to the local area network over AppleTalk networkFax Features Setup flow for Windows printing Setup Flow for Printing FeaturesSystem requirements Set up the Raw TCP if required Setup flow for Raw TCP or LPR printing WindowsSet up the LPD Print Service Install the Client Software for Raw TCP or LPR printing Setup flow for IPP printing Windows Set up the IPP Print Service Set up the Ddns Session if requiredInstall the Client Software for IPP printing Setup procedure Setup flow for printing via Windows print serverSet up the Windows print server Setup flow for Novell printing Windows Setup procedure Set up the NetWare print server Install the Client Software for Novell printing Setup flow for Macintosh printingSet up the NetWare Session Set up the NetWare Print Service Setup procedure Set up the AppleTalk Setup flow for AppleTalk printing MacintoshInstall the Macintosh PPD file Setup flow for LPR printing Macintosh Setup flow for IPP printing Macintosh Set up the Ddns Session if required Set up the Bonjour Setup flow for Bonjour printing Macintosh Setup flow for LPR printing Unix Setup flow for Unix printingInstall the Cups for Unix printing Setup flow for IPP printing Unix Set up the IPP Print Service Setup flow for network-fax transmission Setup Flow for Fax Features Install the Client Software for Network Fax Setup Procedure Set up the Fax Settings About Network Server Setup Setting up Windows Print Server Setting UP Network Server About Network Server Setup Configuring the Windows print server Setting up Windows Print ServerInstalling the printer drivers as shared printers Setting up the client computers Setting up the NetWare in NDS mode Setting up NetWare Print Server Setting up Ndps using Novell printer gateway Setting up the NetWare in Ndps modeSelect a created printer and click OK Page Insert the Client Utilities CD-ROM into the CD-ROM drive Click BrowseClick OK Double-click the Ndps Printer object that you created Click NextClick Finish At each OS tab, and click Continue Name in the Queue User Name field. Then click Finish Update At the server console, enter the following syntax Setting up the NetWare in iPrint mode Enabling iPrint service Troubleshooting Troubleshooting Overview IPP printing in a Windows operating system environment Network Setting Checklists Correctly AppleTalk printing in a Macintosh environment Novell printing in a NetWare environment LPR printing in a Unix environment LPR printing in a Macintosh environment IPP printing in a Unix environment Equipment Detection and Printing Check Problem descriptionCannot detect this equipment Assistance Rectly Cannot ping this equipment Cannot print from client computer Cannot print data to this equipment Page Index Index GA-1190 OME060175B0 GA-1190