Operating Basics
Connecting the LAN cable
■Connect the AC adaptor before connecting the LAN cable. The AC adaptor must remain connected during LAN use. If you disconnect the AC Adaptor while the computer is accessing a LAN, the system may hang up.
■Do not connect any other cable to the LAN jack except the LAN cable. Otherwise, malfunctions or damage may occur.
■Do not connect any power supplying device to the LAN cable that is connected to the LAN jack. Otherwise, malfunctions or damage may occur.
To connect the LAN cable, follow the steps as detailed below:
1.Turn off the power to the computer and to all external devices connected to the computer.
2.Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place.
Figure 4-11 Connecting the LAN cable
3.Plug the other end of the cable into a LAN hub connector or router. Check with your LAN administrator and hardware or software vendor before using or configuring a network connection.
When the computer is exchanging data with the LAN, the LAN Active indicator glows yellow. When the computer is connected to a LAN hub but is not exchanging data, the Link indicator glows.
Disconnecting the LAN cable
Make sure the LAN Active indicator (amber LED) is out before you disconnect the computer from the LAN.
User’s Manual |
