Toshiba L500D user manual Additional memory module, Sound system

Troubleshooting

Additional memory module

Please also refer to Chapter 8, Optional Devices, for further information on installing and removing memory modules.

Problem	Procedure
If there is a memory	In the event of Power indicator flashes when the
malfunction, the Power	computer is turned on you should initially ensure
indicator will repeatedly	that the installed memory module(s) are
flash (on for 0.5	compatible with the computer. If you determine
seconds, off for 0.5	that an incompatible module has been installed,
seconds) in the	you should follow the steps as detailed below:
following patterns:	1. Turn off the computer.
If there is an error in
	2. Disconnect the AC adaptor and all peripheral
only slot A or no
	devices.
memory module is
	3. Remove the battery pack.
inserted in Slot A:
	4. Remove the incompatible memory module.
amber twice, then green
once.	5. Install the battery and/or connect the AC
If there is an error in	adaptor.
Slot B: amber once,	6. Turn on the computer.
then green twice.	If you are still unable to resolve the problem,
If there are errors in
	contact your reseller, dealer or service provider.
both Slot A and Slot B:
amber twice, then green
twice.
An error will occur if a	Remove the memory module from Slot B and
memory module is	insert it into Slot A.
inserted into Slot B
while no memory
module is inserted in
Slot A.

Sound system

In addition to the information in this section, please also refer to the documentation supplied with your audio device.

Problem	Procedure
No sound is heard	Adjust the volume control.
	Turn the dial clockwise to increase the volume
	and turn the dial counter clockwise to decrease
	the volume.
	Check the software volume settings.
	Please check to see if Mute is turned to Off.
	Check to make sure the headphone connection
	is secure.

User’s Manual 9-17