Toshiba L500D Bluetooth, Hdmi monitor output function, Setting is on, On the television

Troubleshooting

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Basics.

Problem	Procedure
Cannot access	Please check Start → All programs → Toshiba
Wireless LAN	→ Utilities → Toshiba HWSetup and click Lan
	tab to check the Wireless Communication Switch
	setting is "ON".

Bluetooth

For further information on Bluetooth wireless communication, please refer to Chapter 4, Operating Basics.

Problem	Procedure
Cannot access	Check to ensure the Bluetooth Manager
Bluetooth device	application is running on the computer and that
	power to the external Bluetooth device is turned
	on.
	Check to ensure that no optional Bluetooth
	Adaptor is installed in the computer - the built-in
	Bluetooth hardware cannot operate
	simultaneously with another Bluetooth controller.
	If you are still unable to resolve the problem,
	contact your reseller, dealer or service provider.

HDMI monitor output function

Problem	Procedure
No display	Try adjusting the contrast and brightness controls
	on the television.
	Press the FN + F5 hot key in order to change the
	display priority and ensure that it is not set for the
	internal display panel only.
	If you are still unable to resolve the problem,
	contact your reseller, dealer or service provider.

If you turn the computer off into Sleep Mode while the display is on TV, the computer will select either the internal LCD or an external computer CRT as the display device the next time is switched on.

User’s Manual 9-21