Operating Basics
■Apply impact or vibration to the computer.
■Install, remove or connect external devices, including such items as a SD/SDHC memory card, miniSD/microSD Card, ExpressCard, Memory Stick/Memory Stick PRO, MultiMediaCard, USB device, external monitor, or an optical digital device.
■Use the audio/video control button to reproduce music or voice.
■Open the optical disc drive.
■Do not use shut down, log off, Sleep Mode or Hibernation Mode functions while writing or rewriting.
■Make sure that the write/rewrite operation is completed before going into either Sleep Mode or Hibernation Mode (writing is completed if you can remove an optical media on the DVD Super Multi drive).
■If the media is of poor quality, or is dirty or damaged, writing or rewriting errors may occur.
■Set the computer on a level surface and avoid places subject to vibration such as airplanes, trains or cars. In addition, do not use the computer on an unstable surface such as a stand.
■Keep mobile phones and other wireless communication devices away from the computer.
Disclaimer
TOSHIBA does not bear responsibility for the following:
■Damage to any
■Any change or loss of the recorded contents of
■Damage that may be caused by using third party equipment or software.
Given the technological limitations of current optical disc writing drives, you may experience unexpected writing or rewriting errors due to disc quality or problems with hardware devices. In view of this, it is good practice to make two or more copies of important data, in case of any undesired change or loss of the recorded contents.
TOSHIBA Disc Creator
Please be aware of the following limitations when you use the TOSHIBA Disc Creator:
■DVD Video cannot be created using TOSHIBA Disc Creator.
■DVD Audio cannot be created using TOSHIBA Disc Creator.
User’s Manual |
