4 Replacement Procedures
4.8Wireless LAN Unit
Removing the Wireless LAN Unit
To remove wireless LAN unit, you must remove strip cover and keyboard first, then follow the steps below to remove wireless LAN unit.
1.Remove the embedded M2.5x4 screw securing the wireless LAN door, and then remove it.
2.Remove one M2x3 screw securing the
Figure 4-11 Removing the wireless LAN card
3.Detach the two ends of LAN antenna.
4.Use your fingers to press the two latches of LAN unit container. The LAN unit will pup up.
5.Grasp the wireless LAN unit and pull it out.
[CONFIDENTIAL] | Satellite M60 Series Maintenance Manual |