Test and Diagnostic Operation

2. 13. LAN Test

The LAN test checks the LAN full-duplex environment.

NOTE: LAN loopback needs to plug in before test begins.

And LAN information will show on the test screen:

?IO Base – Port: 3000H

?IRQ – AH, it’s “IRQ 10”.

?Node – it is “MAC Address”.

?Line Frame – 1514 Bytes.

?Line Speed – 1000Mbps or 100Mbps or 10 Mbps.

?Bus ID – it’s “4”.

The LAN test includes two subtests of the:

1.Speed100

-including Ethernet_802.2, Ethernet_II, Ethernet_SNAP and Ethernet_802.3. All test items are in LSB mode.

2.Speed10

-including Ethernet_802.2 in LSB mode.

3.Speed1000

-including Ethernet_802.2, Ethernet_II, Ethernet_SNAP and Ethernet_802.3. All test items are in LSB mode.

The subtests run automatically.

24

[CONFIDENTIAL]

Satellite M60/M65 Series T&D Operation Handbook

Page 96
Image 96
Toshiba M60 manual LAN Test