4 Replacement Procedures

4.17 Display Mask

Removing the Display Mask

To remove the display mask, first remove the display assembly as described earlier, then follow the steps below:

1.Remove the mask seals to expose four lower inner corner screws securing the display mask.

2.Remove four M2.5x4 black screws from the corners that were previously covered by the mask seals.

3.Carefully insert your fingers between the mask and the LCD panel and pry open the snaps. Start with the four snaps at the top of the display mask. Continue unsnapping the display mask along the two sides and the bottom edge to remove display.

Figure 4-26 Removing the display mask

Satellite M60 Series Maintenance Manual

[CONFIDENTIAL]

4-47

Page 150
Image 150
Toshiba M60 manual Removing the Display Mask