4 Replacement Procedures
Figure 4-12 Removing the wireless LAN unit
CAUTION: Do not touch the connectors on the wireless LAN unit or on the computer. Debris on the connectors may cause malfunction.
Installing the Wireless LAN Unit
To install the wireless LAN unit, follow the steps below and refer to the figures in the preceding section.
1.Remove strip cover and keyboard.
2.Remove the embedded screw securing the wireless LAN door, and then remove it.
CAUTION: Do not touch the connectors on the wireless LAN unit or on the computer. Debris on the connectors may cause malfunction.
3.Gently, push the wireless LAN unit into the wireless LAN container. The two latches of container will automatically close up.
4.Secure the gray support tooth over the wireless LAN card with one M2x3 screw.
5.Attach the white antenna to the main connector, and the black antenna to the Aux connector.
6.Use the embedded screw to secure the wireless LAN door.
Satellite M60 Series Maintenance Manual | [CONFIDENTIAL] |
