Toshiba S11, P11, A11 user manual MultiMediaCard, Dual Pointing device, Touch Pad/AccuPoint

Troubleshooting

MultiMediaCard

For further information, please refer to Chapter 3, Hardware, Utilities and Options.

Problem	Procedure
MultiMediaCard error	Remove the MultiMediaCard from the computer
occurs	and then reinsert it in order to ensure it is firmly
	connected.
	If the problem persists, then you should refer to
	the documentation supplied with your
	MultiMediaCard for further information.
You cannot write to a	Remove the MultiMediaCard from the computer
MultiMediaCard	and check to ensure that it is not write protected.
You cannot read a file	Check to ensure the required file is actually on
	the MultiMediaCard that is inserted into the
	computer.
	If you are still unable to resolve the problem,
	contact your reseller, dealer or service provider.

Dual Pointing device

If you are using a USB mouse, you should also refer to both the USB device section in this chapter, and the documentation supplied with your mouse.

Touch Pad/AccuPoint

Problem	Procedure
Either the Touch Pad	Check the Device Select settings.
or the AccuPoint does	Click Start ->Control Panel ->Hardware and
not work.
	Sound ->Mouse.
	Pressing FN + F9 to enables.
On-screen pointer does	In this instance the system might be busy - Try
not respond to pointing	moving the mouse again after waiting a short
device operation	while.
Double-tapping (Touch	In this instance, you should initially try changing
Pad) or double-	the double-click speed setting within the Mouse
clicking (AccuPoint)	Control utility.
does not work	1. To access this utility, click Start -> Control Panel
	->Hardware and Sound ->Mouse.
	2. Within the Mouse Properties window, click
	the Buttons tab.
	3. Set the double-click speed as required and
	click OK.

User’s Manual 8-15