Toshiba A11 Media care, CD/DVDs, Data Verification, How to learn more about Toshiba Disc Creator

Operating Basics

■TOSHIBA Disc Creator does not support recording to DVD-RAM discs - to achieve this you should use Windows Explorer or another similar utility.

■When you back up a DVD disc, be sure that the source drive supports recording to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW media - if this is not the case then the source disc might not be backed up correctly.

■When you back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW disc, be sure to use the same type of disc.

■You cannot partially delete any data written to a CD-RW, DVD-RW or DVD+RW disc.

Data Verification

To verify that data has been written or rewritten correctly to a data CD/DVD you should follow the steps below before you begin the write/rewrite process:

1.Display the setting dialog box by one of the following two steps:

■Click the Recording settings button ( ) for writing on the main toolbar in the Data CD/DVD mode.

■Select Settings for Each Mode ->Data CD/DVD in the Settings menu.

2.Mark the Verify Written Data check box.

3.Select File Open or Full Compare mode.

4.Click the OK button.

How to learn more about TOSHIBA Disc Creator

Please refer to the Help files for additional TOSHIBA Disc Creator information.

Media care

This section provides tips on protecting data stored on your CD's, DVD's and floppy diskettes. Handle your media with care. Following the simple precautions listed below will increase the lifetime of your media and protect the data stored on it.

CD/DVDs

1.Store your CD's and DVD's in the containers they originally came in to protect them and keep them clean.

2.Do not bend the CD's or DVD's.

3.Do not write on, apply a sticker to, or otherwise mar the surface of the CD or DVD that contains the data.

User’s Manual 4-24