Hardware, Utilities and Options
3.After inserting the PC Card you should refer to its documentation and also check the configuration in Windows in order to ensure that it is correct.
Removing a PC Card
To remove a PC Card, follow the steps as detailed below:
1.Open the Safely Remove Hardware icon on the Windows Taskbar.
2.Point to PC Card and click the left Touch Pad control button.
3.Press the PC Card eject button to partially extend it out of the computer.
If the PC Card is not inserted all the way into the computer, the eject button may not cause it to pop out sufficiently to allows it to be grasped. In this instance, simply push the PC Card firmly back into the computer and then press the eject button again.
4.Press the extended PC Card eject button in order to eject the PC Card partially out of the computer.
5.Grasp the PC Card and remove it.
2
1
1. PC Card eject button | 2. PC Card |
Figure 3-4 Removing the PC Card
Smart Card
A Smart Card is a credit card sized plastic card. An extremely thin integrated circuit (IC chip) is embedded into the card on which information can be recorded. These cards can be used for a wide variety of applications including telephone related and electronic monetary payments.
This section contains information on the proper use of the Smart Card slot, and it is strongly recommended that you read it before operating the computer.
Some models are equipped with a Smart Card slot.
■Your computer supports
■The computer is equipped with either a PC Card slot or a Smart Card slot.
User’s Manual |
