This function may not be able to be used with some connected external devices even if the appropriate mode is selected. In this situation, disable and stop using this function.
Some external devices cannot use Auto Mode. As for the specifications of the external devices, please contact the device’s manufacture or check the specifications of the external device thoroughly before use.
Always use the USB cable that was included with your USB device.
Function under Battery Mode
This option can be used to enable/disable sleep and charge under battery mode. It also displays the remaining battery capacity.
Move the slider to enable or disable this function.
Enabled | Enables Sleep and Charge function under battery |
| mode. |
|
|
Disabled | Enables Sleep and Charge function only when |
| the AC adaptor is connected. |
Disable features when Specifies the lower limit of remaining battery life
the battery level by moving the slider bar. If the remaining battery
reacheslife falls below the setting, the Sleep and Charge
function will be stopped.
This setting is only available when the Function under Battery Mode is enabled.
System ON CDP Charge
This function enable/disable CDP (Charging Downstream Port) to use rapid USB charge while the computer is powered on. When "System ON CDP Charge Mode" is enabled, your computer can supply USB bus power (DC5V, 1.5A) to the compatible ports while the computer is turned on.
To set System ON CDP Charge Mode, click Desktop
Enabled | Rapid USB battery charge at maximum 1.5A |
| while PC is powered On. |
|
|
Disabled | Conventional USB battery charge while PC is |
| powered On. |
The "System ON CDP Charge Mode" may not work with certain external devices even if they are compliant with the USB specifications. In those cases, use a USB port without "USB Sleep and Charge function" or disable “System ON CDP Charge Mode”.
It is recommended that AC adaptor be connected to the computer while supplying USB bus power (DC5V, 1.5A).
User's Manual |
