TV-IP522P ProView Megapixel Internet Camera
Action
The Action menu contains four
Recording
The Recording Setup menu is used to determine when and how digital video recordings are handled. Recordings can be saved to an SD memory card (requires the insertion of an SD card into the camera) or to a shared folder on a secure server. The recording can be scheduled or event based using motion detection as the trigger. One option allows resolution of recordings to be adjusted down to use less hard disk space. Recording can be stopped when the hard disk is full or choose the option to overwrite the disk to replace old recordings.
Enable recording
Tick this checkbox to enable the recording feature. There are two options available for recording, SD Card or Samba network drive.
Record to
Click a radio button to specify where the recording should be saved. The available options are SD Card or Samba network drive.
SD Card
This option specifies that the recording will be saved to the SD Card in the SD Slot on the side of the camera.
Samba network drive
This option specifies that the recording will be saved to a Samba drive on your network.
Samba Auth
Use the
•User Name- Type the user name required to access the Samba drive.
•Password- Type the password required to access the Samba drive.
•Password Confirm- Type the password required to access the Samba drive for verification.
•Server- Type the name or IP address of the server your Samba drive is on.
•Shared Folder- Enter the path that points to the shared server.
Click the Test button to check that the
40
