43
TV-IP522P ProView Me
g
a
p
ixel Internet Camera
RS-485
RS-485 control is used to enable use of external dev ices (such as motorized rotational or pan and
tilt camera stand) operated through the I/O port.
Note: 485+/- of the I/O connector are used for RS-485. Refer to the manufacturer’s user manual
for
proper
connection instructions.
RS-485
support
To us e a RS-485 Pan/Tilt device, click to c heck the Support PAN-TILT option box. Choose the
Protocol used for the device from the pul l-down list. Check the remaining settings to make s ure
they are compatible with the RS-485 device. Refer to the manufacturer’s instructions inc luded with
the RS-485 device.
When the Pan/Tilt stand is properly connected and the RS-485 settings are compatible, the main
user interface will include directional control arrows used for pan and tilt control of the stand.
Directional Vie w Controls in the main User Interface
Home button Left click the round button labeled [+] at the center of the controls to return the
camera to the Home position.
Pan / Tilt control Use your mouse and left click button to move the directional control in the
right panel of the video display page and left click on the a rrow to move the camera in that
direction.