TRENDnet TVIP522P Tool, Load From Local Hard Drive, Restore To Factory Defaults, Reboot Device

TV-IP522P ProView Megapixel Internet Camera

Tool

The Tool menu contains two sub-menus that provide the Backup and Restore and Firmware upgrade.

Back Up and Restore Camera Settings

Save System Settings/Restore/Reboot menu

Save To Local Hard Drive

To save configuration settings for the camera to a file on a local hard disk, click the Save Configuration button. A prompt appears to confirm that you want to save the file. Choose the location and save the file to load the same settings.

Load From Local Hard Drive

To load a previously saved configuration settings file, click the Browse button to Load From Local Hard Drive to locate the file, and then click the Load Configuration button. It will take a few seconds to load the new settings. The camera will then restart.

Restore To Factory Defaults

To restore the camera to the factory default configuration settings, click the Restore Factory Defaults button. A prompt appears to confirm that you want to restore the default settings. Click OK to restore the settings.

Reboot Device

To perform a simple restart of the camera, click the Reboot Device button.

45