Tripp Lite B022-U08-IP FCC Information, User Notice, Package Contents, Introduction, Features

1. FCC Information

This is an FCC Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

2. User Notice

All information, documentation and specifications contained in this manual are subject to change without prior notification by the manufacturer. The manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer’s software described in this manual is sold or licensed “as is.” Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor or its dealer), assumes the entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modifications to this device. It is the responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational voltage setting was not selected prior to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT BEFORE USE.

3. Package Contents

This package consists of:
•	B022-U08-IP KVM Switch	•	External Power Supply
•	6 ft. USB/PS2 Combo KVM Cable Kits (x2)	•	Rubber Feet
•	USB/PS2 Combo Console Cable Kit	• CD with Owner’s Manual, Quick Start Guide and Device Files
•	RJ11 to DB9 Firmware Upgrade Cable	•	Quick Start Guide
•	Rackmount Hardware

Check to make sure that all of the components are present and in good order. If anything is missing, or was damaged in shipping, contact your dealer.

Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the switch or to any other devices in the installation.

4. Introduction

4.1Features

•1U Rackmount KVM Switch with built-in IP access.

•Connect either USB or PS/2 computers using P778-Series USB/PS2 Combo KVM Cable Kits – no need for separate cable kits.

•Control up to 8 computers on a single KVM switch.

•Daisy-chain multiple KVM switches together to increase the number of connected computers. An additional 15 KVM switches can be daisy-chained from the B022-U08-IP for a total of 248 connected computers.

•Remotely access computers via LAN, WAN or Internet via the Windows™ or Java browser clients.

•AP Windows and Java clients allow the KVM to be remotely accessed via the network without going through a browser.

•External USB 1.1 port allows USB peripheral devices to be shared amongst connected computers.

•Grayscale feature allows you to view remote sessions in black and white, reducing the amount of data traveling over the network and improving keyboard/mouse response time over IP.

•Web management interface, OSD and toolbars provide convenient, user-friendly operation.

•3-level security (Admin, User and Select) – up to 64 accounts can be created.

•Panel Array Mode – remotely monitor multiple ports at the same time.

•Message board feature allows users who are logged in at the same time to communicate with each other and manage port access.

•CD includes a Windows-based log server that records events on the installation and writes them to a searchable database.

•Supports RADIUS and LDAP/S authentication.

•Flash firmware upgradable via network and included firmware upgrade cable.

•Supports both IPv4 and IPv6.

•Supports Link Local IPv6 Address and IPv6 Stateless Auto configuration protocol.

•Web Management Interface, Remote OSD and Local OSD can be displayed in English, Spanish, French, German and Japanese.

•Advanced encryption technologies: 128-bit SSL, 128-bit RC4, 1024-bit RSA, 56-bit DES, 256-bit AES, 168-bit 3DES.

•Video resolutions up to 2048 x 1536, DDC2B are supported at the local console. Video resolutions up to 1600 x 1200 @ 60Hz,

24-bit color depth are supported at the remote console. 3