![](/images/new-backgrounds/1297949/29794997x1.webp)
SYMPTOM/SOLUTION GUIDE
CHAPTER SEVEN: CARE AND MAINTENANCE
SYMPTOM |
| CAUSE | SOLUTION | |
Circuit breaker on | A. Damaged motor | Service required | ||
| ||||
treadmill trips when | B. Damage or defective | Service required | ||
the power cord is |
| motor power supply |
| |
| board |
| ||
plugged into wall. | C. Damaged motor control | Service required | ||
Circuit breaker on |
| circuit board |
| |
D. Restricted belt or | Check and remove | |||
treadmill trips when |
| flywheel | obstruction or call dealer | |
|
|
| ||
inputting speed and | E. Treadbelt over tensioned | See adjustments in Assembly | ||
starting |
|
| Guide | |
|
|
| ||
|
|
|
| |
Computer display | A. | No power to treadmill | Restore power at electrical outlet | |
LED’s do not |
|
| or reset circuit breaker if in “on/ | |
|
| off” position. | ||
illuminate. |
|
| ||
|
|
| ||
| B. | Circuit breaker trip | Reset Circuit Breaker | |
| C. Upper wire harness not | Service required | ||
|
| connected or |
| |
|
| completely connected. |
| |
Incline Motor and | A. | Upper wire harness | Service required | |
| ||||
tread motor will not |
| damaged or not connected or |
| |
| completely connected |
| ||
turn on |
|
|
| |
Incline motor does | A. Incline wire harness | Service required | ||
| ||||
not operate but the |
| damaged or not |
| |
| connected |
| ||
treadbelt moves |
|
|
| |
Scrambled digits on | A. Damaged computer | Service required | ||
computer LED’s |
| board |
| |
B. Upper wire harness | Service required | |||
| ||||
| damaged or partially |
| ||
| connected |
| ||
Squeaking noise | A. Poly | Service required | ||
from motor while | B. Motor brush noise | Service required | ||
using the treadmill |
| excessive |
| |
|
|
| ||
|
|
|
|
Z5.4 & Z5 TREADMILL OWNER’S GUIDE | 49 |
|