3.8Replacing the SAS/SATA Backplane
To replace the SAS/SATA backplane, you need to remove all the fans and the fan cradle first. Refer to the first three steps given in “2.5 Installing the Floppy Disk Drive (Option)”. Then, do the following:
1.Remove all the SAS/SATA
2.Disconnect all cables from the SATA/SAS backplane to be replaced.
3. Remove the screw holding the SATA/SAS backplane.
4. Lift the backplane from the chassis.
5.Place a new backplane in position and secure in place with one screw. Then reconnect the power and data cables.
Chapter 3: Replacing | 55 |
