Tyan Computer B5382 manual Installing Motherboard Components, Removing the Chassis Cover

2.2Installing Motherboard Components

This section describes how to install components on to the motherboard, including CPUs, memory modules and expan- sion cards.

2.2.1Removing the Chassis Cover

Follow these instructions to remove the Tank FT48-B5382 chassis cover. This step is required before any other proce- dures in this chapter can be undertaken.

1.If the chassis lid is secured with two screws from the rear of the unit, remove them first. See “System Rear View” on page 10 for the screw locations.

2.Press the button on the release catch and lift the catch. Slide the chassis lid back slightly.

3. Lift the lid free from the chassis.

Follow the steps above in reverse to refit the chassis cover.

Chapter 2: Setting Up 21