Tyan Computer B5382 manual Before You Begin, Work Area, Tools

Chapter 2:

Chapter 2: Setting Up

2.1Before You Begin

This chapter explains how to install motherboard compo- nents, including CPUs, CPU heatsinks, memory modules, and PCI cards. There are also instructions in this section for installing SATA hard drives.

Take note of the precautions mentioned in this section when installing your system.

2.1.1Work Area

Make sure you have a stable, clean working environment. Dust and dirt can get into components and cause malfunc- tions. Use containers to keep small components separated.

Putting all small components in separate containers prevents them from becoming lost. Adequate lighting and proper tools can prevent you from accidentally damaging the internal components.

2.1.2Tools

The following tools will be required to complete the installa- tions described in this chapter.

•A cross head (Phillips) screwdriver

•A grounding strap and/or anti-static pad

Most of the electrical and mechanical connectors in your sys- tem can be disconnected using your fingers. It is recom- mended that you do not use needle-nosed pliers to remove connectors as these can damage the soft metal or plastic parts of the connectors.

Chapter 2: 19