Figure 7 shows the USB ports and Figure 8 the PS/2 ports.
INSTALL
Figure 7 | Figure 8 |
!
important!
Installing your add-in cards is relatively simple but...
there are a few rules you need to follow when plugging in a card. In order to assure proper operation and a quick installation, adhere to these guidelines:
•If you are going to install a
•NEVER force a card into a slot. If it doesn’t fit, look at the socket on the computer to make sure there are no wires or other obstructions to the slot.
•NEVER plug an ISA card into a PCI slot or a PCI card in an ISA slot. You will void your warranty and damage your system board if you do this.
•When plugging the card in, especially when installing long cards, try to push the entire card in at one time. Don’t force one end of the card into the socket first and then the other. This will create a rocking motion between the card and the slot and it will damage the pins within the socket.
•Make sure that the cards are seated securely into the slots.
http://www.tyan.com
17
