Tyan Computer InterServe 90 manual Settings Chart, Quick Boot

Settings Chart (Continued)

Setting Option	Optimal Default	Fail-Safe Default
S .M.A.R .T . for HardDis ks	Dis abled	Dis abled
B oot UpNum-Lock	On	On
P S /2 Mous e S upport	E nabled	E nabled
P rimary Dis play	VGA/EGA	VGA/EGA
P as s wordCheck	S etup	S etup
B oot T o OS /2	No	No
Internal Cache	WriteB ack	WriteB ack
S ys tem B IOS Cacheable	E nabled	Dis abled
Cache B us E CC	E nabled	E nabled
Default P rimary Video	AGP	AGP
MP S R evis ion	1.1	1.1
C000,16K S hadow	Cached	Cached
C400,16K S hadow	Cached	Cached
C800,16K S hadow	Dis abled	Dis abled
CC00,16K S hadow	Dis abled	Dis abled
D000,16K S hadow	Dis abled	Dis abled
D400,16K S hadow	Dis abled	Dis abled
D800,16K S hadow	Dis abled	Dis abled
DC00,16K S hadow	Dis abled	Dis abled

Advanced Setup

Quick Boot

Set this option to Enabled to instruct AMIBIOS to boot quickly when the computer is powered on. This option replaces the old Above 1 MB Memory Test Advanced Setup option. The settings are:

	Setting	Description
		AMIBIOS tests all system memory.
	Disabled	AMIBIOS waits up to 40 seconds for a READY signal from the IDE hard disk drive. AMIBIOS waits for .5
		seconds after sending a RESET signal to the IDE drive to allow the IDE drive time to get ready again.
		AMIBIOS checks for a <Del> key press and runs AMIBIOS Setup if the key has been pressed.
		AMIBIOS does not test system memory above 1MB.
		AMIBIOS does not wait up to 40 seconds for a READY signal from the IDE hard disk drive. If a READY signal
	Enabled	is not received immediately from the IDE drive, AMIBIOS does not configure that drive. AMIBIOS does not
		wait for .5 seconds after sending a RESET signal to the IDE drive to allow the IDE drive time to get ready again.
		You cannot run AMIBIOS Setup at system boot, because there is no delay for the Hit <Del> to run Setup
		message.
http://www.tyan.com

BIOS

45