3. INSTALLATION
Please follow the instructions and the diagram below to set up the system.
NOTE: The IP camera is linked by its Video Out connection via a BNC connector to a monitor's Video In connection. If this connection is there, you can see some information on the monitor screen, such as the IP camera factory default Static IP address(192.168.1.168). But the IP camera Static IP address can only appear if there is a connection between the IP camera and another device. If there is no such connection, the IP camera factory default Static IP address will not appear on the monitor screen.
3.1 CONNECTING WITH AN NVR
Use a straight LAN cable to connect directly to an NVR.
CAMERA
CONNECT TO ETHERNET
RJ45 CONNECTOR
CONNECT TO NVR
ETHERNET PORT
VIDEOAUDIO
ETHERNET
10/100
OUT OUT
SD Card
ALARM I/O
DC12V
3.2 CONNECTING WITH A DVR
CONNECT TO VIDEO OUT | CAMERA | ||
BNC CONNECTOR |
|
|
|
|
| ||
CONNECT TO DVR |
|
|
| ||
VIDEO IN |
|
|
|
| |
|
|
| SD Card |
|
|
| FROM MUX |
|
|
|
|
VIDEO | MAIN MONITOR |
|
|
|
|
|
| AUDIO |
|
| |
|
|
|
|
| |
| IN | IN |
|
|
|
|
| ETHERNET |
|
| |
|
| 10/100 |
|
|
|
OUT | OUT |
|
|
| |
|
|
|
| ||
TO | TO |
| ALARM | I/O | DC12V |
MUX'S VCR IN | MONITOR |
| |||
|
|
| |||
16 | Installation and Operation Guide |
