Installation and Operation Guide
APPENDIX 2. –The ARP function
Setting the IP Address
The Ethernet interface on the LANCam has a default IP address (192.168.1.168) that most likely needs to be changed to make it work on your local network. You need to acquire a unique IP address (ask your network administrator). For the initial setting of the IP address the LANCam needs to be connected to the same network segment as your client, and the IP address can then be configured by using a combination of ARP and ping command.
Use any of the following ways to set the IP address within thirty seconds after booting the LANCam
ARP and ping from Windows or MS-DOS:
The user can open the PC's
1.Start a DOS prompt window
2.Type the following in 30 seconds after the booting: arp
[or arp
Example:
arp
The IP address now is: 192.168.1.100.
83
