Installation and Operation Guide
Frame rate:
Format:
Click on the
“15FPS”, “24FPS” or “(25) 30FPS”.
Click to choose the “MJPEG” or the “MPEG4” mode.
Fine Tune mode:
| White Balance: | Scroll to choose the mode from “Auto”, “Fluorescent (3200K)”, “Indoor | |
|
|
| (4200K)”, “Outdoor (6500K)”, ”Push Hold”. |
| Flickerless: | Mark the “Flickerless” “ON” or “OFF”. Click your choices to enable. | |
| Mirror: | Mark the “Mirror” “ON” or “OFF”. Click your choices to enable. | |
| High Speed Shutter: | Mark the “High Speed Shutter” “ON” or “OFF”. Click your choices to | |
|
|
| enable. |
| BLC Mode: | Scroll to choose from “Disable”, “Weighted” or “Fixed Gain”. | |
| Backlight: | Select in the backlight level in the blank (0 to 255). | |
| Brightness: | Select your desired quality of image brightness from a spectrum of 0 to | |
|
|
| 255. |
| Contrast: | Select the contrast level in the blank (0 to 255). | |
| Saturation: | Select the saturation level in the blank (0 to 255). | |
| Sharpness: | Select the sharpness level in the blank (0 to 255). | |
MJPEG mode: |
| ||
| Viewer type: |
| Click to choose the viewer type of the “ActiveX” or “AJAX” mode. |
| MJPEG Deinterlace: | Click to choose the MJPEG Deinterlace of the “ON” or “OFF” mode. | |
| Submit: |
| Click to submit the new image setting to the IP camera. |
| Default: |
| Click this button to install the default settings in all the entries for image |
|
|
| parameters on this page. |
35
