Uniden BC246T owner manual Size Code Restrictions, Appendix

of the replies to the conversations with ID’s assigned to the block you just programmed, then you’ve probably selected the right size code and can work on the next block of the map.

Finally, for most public safety systems there are some size codes which are more common. S-3 and S-4 are probably the most common, followed by S-10, S-11, and S-12.

Size Code Restrictions

If you select size code S-12, S-13, or S-14, there are some restrictions as to which blocks can be used for these codes.

S-12 can only be assigned to Blocks 0, 2, 4, or 6.

S-13 can only be assigned to Blocks 0 and 4.

S-14 can only be assigned to Block 0.

Since these size codes require multiple blocks, you will be prompted for the next available block when program- ming a fleet map. For example, if you assign Block 0 as an S-12, you will be prompted for b2, the next block avail- able, instead of b1. And if you assign Block 0 as an S-14, you would not see another prompt because it uses all available blocks.

Appendix

108