Uniden BC246T owner manual Setting System Frequencies, Entering/Editing Motorola Channel Groups

•See “Setting Control-Channel Only (Motorola Sys- tems Only)” on Page 68

•See “Setting System Lockout” on Page 62

•See “Reviewing Locked Out Frequencies” on Page 86

•See “Setting System Attenuation (Trunked Systems Only)” on Page 68

•See “Deleting Systems” on Page 69

•See “Copying/Pasting Systems” on Page 69

•See “Setting System Frequencies” on Page 53

•See “Entering/Editing Motorola Channel Groups” on Page 53

Setting System Frequencies

SET FREQUENCIES	E
New FREQUENCY	E

Input a system frequency, then press E.

To enter additional frequencies, press Menu , use the scroll control to select New Frequency, then repeat the above.

Note: If you select Control Channel Only mode (see “Set- ting Control-Channel Only (Motorola Systems Only)” on Page 68), you only need to enter the frequency(s) that can be assigned as the control channel (this is usually notated on the available frequency lists). Otherwise, you must enter all of the frequencies.

Entering/Editing

Motorola Channel Groups

To enter channels in a system, first set up a channel group (or groups) to hold the channels. Then, enter the channel and channel parameters in the group(s).

Programming Radio Systems

53