•Priority On: While scanning a conventional system, the scanner interrupts every 2 seconds and checks the priority channels in each unlocked conventional system. Priority channels in lower priority key num- bered systems (starting from 1) have highest priority. Pri appears when you select this mode.
•Priority Plus: The scanner only scans priority channels in unlocked conventional systems. Pri flashes when you select this mode.
Using the Backlight
Menu
Set Backlight E
•10 sec The backlight stays on for 10 seconds after you press 
.
•30 sec The backlight stays on for 30 seconds after you press 
.
•Squelch The backlight turns on when the squelch opens then stays on for 5 seconds.
•Keypress The backlight turns on when any key is pressed then stays on for 10 seconds.
•Infinite The backlight turns on when you press 
then stays on until you press 
again.
Pressing any key while the backlight is on extends the
backlight period. Pressing 
while the backlight is on turns off the backlight.
Initializing the Scanner’s Memory
To initialize the scanner’s memory, turn off the scanner. Then, press 2, 9, and Hold while turning it on.
Important! This deletes all preprogrammed data. You cannot restore preprogrammed data that has been deleted.
Other Settings
46
