Uniden BC246T owner manual Setting Up Your Scanner, Using Internal Batteries

Setting Up Your Scanner

These guidelines will help you install and set up your new scanner:

•If your scanner receives interference or electrical noise, move the scanner or its antenna away from the source.

•To improve the scanner’s reception, use an optional external antenna designed for multi-band coverage. (You can purchase this type of antenna at a local electronics store). If the optional antenna has no cable, use 50-70 ohm coaxial cable for lead-in.

A mating plug might be necessary for the optional antennas.

•Use an optional mono earphone or mono headset with proper impedance (32Ω) for private listening. Read the precautions on the inside front cover of this Owners Manual.

•Do not use the scanner in high-moisture environments such as the kitchen or bathroom.

•Avoid placing the scanner in direct sunlight or near heating elements or vents.

Using Internal Batteries

You can power your scanner using two alkaline, or rechargeable AA batteries.

Setting Up Your Scanner

29