Input a system frequency, then press E. The scanner then prompts you to enter the LCN for the entered frequency. Enter the LCN, then press E.
To enter additional frequencies, press Menu , use the scroll control to select New Frequency, then repeat the above.
Entering/Editing LTR Channel Groups
To enter channels in a system, first set up a channel group (or groups) to hold the channels. Then, enter the channel and channel parameters in the group(s).
Setting Up a Channel Group
EDIT GROUP E
NEW GROUP E
The scanner creates a group with a default name of GROUP nn. nn increments by one for each new group you create within a system.
Next, refer to the appropriate section to set
•See “Entering/Editing the Group Name” on Page 70
•See “Setting the Group Quick Key” on Page 70
•See “Setting Channel Lockout” on Page 76
•See “Deleting Groups” on Page 71
•See “Copying/Pasting Systems” on Page 69
•See “Entering/Editing LTR Channels” on Page 59
Entering/Editing LTR Channels
Edit Channel | E |
NEW Channel | E |
Input TGID |
|
Enter the talk group ID for the channel, then press E.
Note: Press No to enter a hyphen.
Programming Radio Systems
59
