appear for about 3 seconds. Press E when this appears to jump to and hold on the frequency.
If this option is turned on, the scanner overrides the current channel and goes to the Close Call hit. The scanner displays CC Found! Press Any Key. When you press a key, the frequency is displayed.
Turn scroll to display an option, then press E.
•Set CC Mode: Lets you select the Close Call mode. If you turn this option on, the scanner sets itself to its Close Call settings about once every 2 seconds.
Turn scroll to display an option, then press E.
You can also toggle this setting by pressing then 
Func
•CC AutoStore: Lets you select whether the scan- ner automatically stores Close Call hits into chan- nels. If you turn this option on, the scanner starts Close Call mode and stores any Close Call hits, up to the maximum you specified in the Max Auto Store setting. If the scanner stores more hits this setting, it stops Autostore operation.
Turn scroll to display an option, then press E.
Close Call Hits
When the scanner detects a Close Call hit, it alerts you according to the Override and Alert settings in the previ- ous section. While listening to a Close Call hit, you can press Hold to hold on the hit frequency, press E to quickly save the frequency into memory, press L/O to lockout the frequency from Close Call and Search operation, or wait for the transmission to end.
If you are in Close Call Only or Close Call Override mode, and you do not press any key, the scanner returns to its previous operation after the transmission ends and the set delay time expires.
If you are holding on the frequency, press Hold again to resume the previous operation.
Using the Close Call Feature
85
