Using Weather Alert (SAME)
Your scanner has been primarily designed to be a radio scanner. While it incorporates weather alert as one of its features, we strongly recommend that you not use the scanner as your sole means for receiving emergency alerts. Your local electronics retailer carries several weather radios specifically designed for this function.
Your scanner allows you to search for a local NOAA weather broadcast and set it to alert when a SAME weather alert is broadcast on a NOAA channel. You can also program SAME codes into the scanner and set a weather channel as a priority channel.
In the following sections, you can also access the weather menu from Hold mode by pressing Func then Wx.
Searching For a Weather Broadcast
|
|
| WX OPERATION E |
| Menu | ||
Weather Scan | E | ||
The scanner starts scanning the preprogrammed weather frequencies, and stops on the first signal. If this station is weak, rotate scroll to check for other weather broadcasts in your area.
Note: NOAA broadcasts are continuous broadcasts. You will only lose reception if you move out of a coverage area. If the signal is lost, the scanner resumes searching for a weather transmission.
Turning Weather Alert On/Off
In weather alert mode, your scanner functions as a severe weather warning radio. This is especially useful when your area is expecting severe weather conditions late at night. When you set the scanner to weather alert mode, it holds on the weather channel, but does not play the channel’s audio. If it detects a weather alert, it sounds a tone, displays information about the weather alert, and turns on the audio so you can hear the weather broad- cast.
Using Weather Alert (SAME)
91
