NFM - the scanner uses narrowband FM for the frequency.
Note: The default setting is AUTO.
Setting Channel Attenuation (Conventional Channels Only)
Menu
Program SysteMS | E |
Select the system | E | |
Edit Group | E |
|
Select the group |
| E |
Edit Channel | E |
|
Select the channel | E | |
Set Attenuator |
| E |
This setting controls whether the scanner attenuates signals on this channel. Select your setting, then press E.
On - the channel is attenuated by about 18 dB
Off - the channel is not attenuated.
Notes:
•The default setting is Off.
•For trunked systems, the attenuation is a system- level setting.
•You can also toggle this setting by holding on the channel and pressing Func and E/ATT
Setting the Frequency Step (Conventional Channels Only)
Menu
Program SysteMS | E |
Select the system | E | ||
Edit | Group | E |
|
Select the group |
| E | |
Edit | Channel |
| E |
Programming/Editing Optional Settings
75