•See “Setting
•ee “Setting Emergency Alert (Motorola and EDACS Systems Only)” on Page 67
•See “Setting the EDACS ID Format” on Page 67
•See “Reviewing Locked Out Frequencies” on Page 86
•See “Setting Channel Attenuation (Conventional Channels Only)” on Page 75
•See “Deleting Systems” on Page 69
•See “Copying/Pasting Systems” on Page 69
•See “Setting System Frequencies” on Page 56
•See “Entering/Editing EDACS Channel Groups” on Page 56
Setting System Frequencies
SET FREQUENCIES | E |
NEW FREQUENCY E
Input a system frequency, then press E. The scanner then prompts you to enter the LCN for the entered frequency. Enter the LCN, then press E.
To enter additional frequencies, press Frequency, then repeat the above.
Menu , scroll to New
Note: The scanner only accepts a single frequency and no LCN for SCAT systems.
Entering/Editing EDACS Channel Groups
To enter channels in a system, first set up a channel group (or groups) to hold the channels. Then, enter the channel and channel parameters in the group(s).
Setting Up a Channel Group
EDIT GROUP E
NEW GROUP E
Programming Radio Systems
56