•The scanner defaults to AFS (agency, fleet, subfleet) format - the format used in most EDACS systems.
•See “EDACS Trunking” on Page 24 for more information about the AFS format.
Setting Control-Channel Only (Motorola Systems Only)
Menu
Program SysteMS | E |
Select the system | E |
Edit Sys Option | E |
Set | E |
This setting determines the frequencies you need to enter for Motorola systems. Select your setting, then press E.
Off - you must enter all voice and control channel frequencies.
On - you only need to enter control channel frequencies.
Note: The scanner defaults to Off.
Setting System Attenuation (Trunked Systems Only)
Menu
Program SysteMS | E |
Select the system | E |
Set ATTENUATION | E |
This setting controls whether the attenuator will be on or off for the current system. Select your setting then press E.
Off - the attenuator is off.
On - system frequencies are attenuated by about 18dB.
Notes:
•Turn on this setting if you are near other strong signal sources. Attenuation sometimes helps to reduce
Programming/Editing Optional Settings
68