Uniden BC246T Editing the Fleet Map Motorola Systems Only, Programming/Editing Optional Settings

Editing the Fleet Map (Motorola Systems Only)

Menu

Program SysteMS E

Select the system		E
Edit	Sys Option	E
Edit	Fleet Map	E

For Motorola Type I systems, you must enter a system fleet map in order for the scanner to properly track and display talk group ID's. The fleet map is usually included in the same resource that provided system frequencies and talk group ID lists.

Rotate the scroll control to select the fleet map:

Preset - select from the 16 most common fleet maps (see “Preset Fleet Maps” on Page 105)

Custom - allows you to enter a custom fleet map. Enter the size code for each block.

Notes:

•If you don't know the fleet map for your Motorola Type I system, check the Internet. This information is commonly posted on sites such as those we reference in “Where To Get More Information” on Page 26.

•The default setting of no fleet map is the correct setting for Motorola Type II systems.

Setting the Motorola Status Bit (Motorola Systems Only)

Menu

Program SysteMS E

Select the system	E
Edit Sys Option	E
Set Status Bit	E

Motorola systems use talk group ID's in multiples of 16. ID numbers that fall between these ID's indicate special

Programming/Editing Optional Settings

65