Uniden BC246T owner manual Temporarily Holding On a System, Holding On a Channel

•ID Scan – the scanner only stops on talk group ID’s that you have programmed into the system

•ID Search – the scanner stops on any unlocked talk group that becomes active.

To toggle between ID Scan and ID Search, press Scan while the scanner is scanning the system.

Temporarily Holding On a System

To temporarily hold on a system, press and hold Func . To hold on a different system, continue to hold Func and rotate the scroll control to select the system. Normal scanning resumes 2 seconds after you release Func .

Holding On a Channel

To hold on a channel, press Hold while the channel is active. To select a different channel, rotate the scroll con- trol. If you scroll past the beginning or end of the current system, the scanner selects channels in the previous or next system. To resume scanning, press Scan.

Quickly Storing an ID During

ID Search

To quickly store an active talk group ID during ID search, press E. You see:

Quick TGID Save? 4128

To save the ID into a channel, press E. Otherwise, press No. If you press E, the scanner stores the ID into a channel group called Qck Save Grp in the current system, then resumes normal scanning.

Basic Operation

43