Uniden G955 manual Attach the Camera

•• Optimized motion detection range is 6 - 18 feet for the GC45 camera. The farther away an object is, the less accurate the motion detection.

•• Avoid having a direct light source in the view of the camera, including street lights, ceiling or floor lamps, spotlights in the driveway, etc.

•• Rainfall, pool water ripples/reflections, tree/shrub leaves blowing in the wind - and the shadows they create - can generate motion detection false alarms.

You can mount the camera with the stand on the bottom (on a wall or table-top) or on the top (on the ceiling). When you are positioning the camera, you might want to bring the monitor along; it’s much easier to get the camera into the right position when you have the display handy.

1.Hold the base of the camera stand where you want to mount it and mark the location of the screw holes.

2.Use the included screws and anchors to attach the base to the wall or ceiling.

3.Before attaching the camera, tug gently on the stand to make sure it is securely in place.

Attach the Camera

1. For each camera, attach the camera bracket to the mounting screw. You can attach the stand to the top or the bottom of the camera as needed. Tighten it a few turns, then turn the camera to face the direction you want.

	Tighten the brace against	1	Attach the camera
2			to the mounting
	the camera to		screw and turn it
	secure it		to the desired
	in place.		direction.
3
Loosen the
wingnut to			Adjust the post to
unlock the		4
mounting			the correct angle,
post.			then tighten the
			wingnut to lock the
			post into place.

10