Uniden G955 manual Set Up the Monitor, Screen remains dark until the cameras are powered up

SETTING UP THE EQUIPMENT

Set Up the Monitor

1.Flip out the stand on the back of the monitor, and extend the antenna. Connect an AC adapter to the power input on the side of the monitor.

Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet.

2.Press and hold the Power button on the top of the monitor for 3 - 4 seconds to power it up.

3.The monitor displays the Uniden Welcome screen for a few seconds and then transitions to the LIVE view.

The screen remains dark until the cameras are powered up.

Mount the Camera Stand

General Guidelines

The Uniden Guardian GC45 cameras included with your monitor are weatherproof and have an IP66 rating. Water can be sprayed on them and they will still work; however, the cameras cannot be submerged.

Although the cameras can be exposed directly to the rain, it is recommended that, if they are used outdoors, they be mounted under some type of cover like a patio overhang or eave. As rainwater drops start to dry on the camera glass, it can create spots that will reflect the light from the infrared LEDs used for night vision, thus causing lower quality video.

Also, as dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the infrared LED and might lower video quality. Periodically clean the lens glass with a soft cloth.

Placement Considerations

Consider the following when placing cameras:

•• The clearest line-of-sight between the camera and monitor is best.

——Walls, especially brick and concrete, shorten the transmission distance.

——Placement next to windows allows better transmission.

9