Setup
Installing the Battery Pack
1.Open the cover.
2.Connect the battery pack connector observing the correct polarity.
3.Replace the cover and press down until it clicks into place.
Charging the Battery Pack
Use the AC Adapter/Charger to power the UBC3300XLT from an AC outlet.
You can use your scanner while the battery charges. To fully charge the battery, leave the AC Adapter/Charger connected for 14 — 16 hours.
CH/
FRQ
HOLD/ |
| RSM |
MAN |
|
|
SCAN | AIR/STEP | SEARCH |
MENU/BACK |
| TRUNK |
|
| |
L/O |
|
|
REVERSE |
| SELECT |
| MUTE |
Use only the supplied AC Adapter
Note: Disconnect the AC Adapter/Charger from the unit when charging is complete.
Low Battery Indicator
When the battery pack is low and needs to be charged, 
appears on the display. You will also hear a beep every 15 seconds as an audible alert.
13
