1.Press MENU/BACK.
2.Select 3:SYSTEM OPTION /
7:DATA SKIP by rotating the VFO and pressing E.
3.Select 1:ON by rotating the VFO and pressing E.
SYSTEM OPTION 5:PC CONTROL 6:CLONE
7:DATA SKIP
When Data Skip is active, your scanner may pause momentarily on an unwanted signal but will resume searching in 2 or 3 seconds. The Data Skip feature is active as well as Scan mode. Data Skip does not function during AM/WFM band Scan, Chain Search for AM/WFM band, Priority Scan, and Trunking mode.
Frequency Skip
If a particular frequency continues to interrupt search scanning, it is possible to set your scanner to skip the frequency.
To skip over a frequency, press L/O when stopping at the frequency you want to skip or when in Search Hold mode.
Note:
• If all frequencies in the search range are set to skip, a beep sounds and it moves to Search Hold mode.
To resume searching:
1)Cancel the Frequency Skip set.
–––OR
2)Reset the Search Frequency range.
RSM
TRUNK
REVERSESELECT
.E
To cancel all skipped frequencies, press and hold L/O for 2 seconds in Search Hold mode.
Storing Search Frequencies
You can quickly store any frequency you find during Search.
1.During Search, press HOLD/MAN to store or when the scanner stops on the frequency you want to store.
38
