To enter a LTR ID:
For a LTR ID, the Area Code, Home Repeat number and ID make up the talk group ID. Please see page 64 for more information.
1. | Enter the Area Code and then press | ||
| . | (decimal key) | |
|
| ||
|
|
| |
2. | Enter the Home Repeater number and |
| |
| then press . (decimal key). | ENTER ID | |
3.Enter the ID you want to store.
4.Press E.
Note: To clear a stored ID while entering an ID, press 0 and E successively, and start over.
Assigning a Text Tag to a Talk Group ID
1. | Press MENU/BACK. |
| |
2. | Select 2:SCAN OPTION / | 1216 | |
| 2:TRUNK by rotating the VFO and | ||
| ENTER ALPHA TAG | ||
| pressing E. | ||
|
|
3.Select the bank number by rotating the VFO and pressing E. You can also enter the Bank number by using the keypad bank.
4.Select 3:TALK GROUP and ID location number by rotating the VFO and pressing E.
5.Select 2:ALPHA TAG by rotating the VFO and pressing E.
6.The cursor appears on the display. Rotate the VFO to change letters, and press HOLD/MAN or RSM to move right or left. Both capital and lower case letters are available, as well as numbers and punctuation marks.
7.After entering the desired text, press E.
☞Remember! To clear a mistake while entering the letters, press HOLD/MAN, RSM or . (decimal key) repeatedly until the display is cleared.
49
