Moving between Scan List Memories

There are a number of ways to step and move through your Scan List memories:

1.Press HOLD/MAN in the ID Scan mode and rotate the VFO to move to up or down.

2.Or, press HOLD/MAN in the ID Scan mode, next press

0-9(scan list number), then press 0-9(memory position). For example to move to Scan List 4, memory position 10, press: HOLD/MAN, 4, 0, HOLD/MAN

Set Activity ID to ON, when your scanner finds an active ID during a transmission the active ID appears every 0.5 seconds.

I-Call (Motorola/EDACS)

I-Calls are direct unit-to-unit transmissions that are not heard by other system users. Your UBC3300XLT can receive these transmissions. How you receive I-Calls depends on whether you are in Search or Scan mode.

During I-Call reception the display will show the Unit ID number of either the transmitting or receiving mobile unit, not a talkgroup. Unit IDs will display differently according to the type of trunked system, and will replace the n's shown here.

EDACS and MOTOROLA TYPE 1

innnnn

MOTOROLA TYPE 2

7nnnnn

Hint -- There are thousands of Unit IDs in typical systems, but relatively few I-Calls at a given moment, so it is normally best to let the scanner receive any I-Calls without trying to specify particular units.

I-CALLS IN SEARCH MODE

In Search mode, the scanner default is that I-Call reception is OFF. This means that I-Calls will not be received until you program them to be ON. You have three choices for controlling I-Call reception. Through the Menu system, go to 2:SCAN OPTION / 2:TRUNK - select bank number -/ 8:I-CALL, and make your selection.

The menu choices are:

 

 

I-CALLs

TALKGROUPS

 

1

ON

YES

Received normally

Use this choice to receive I-Calls

 

 

 

 

together with normal

 

 

 

 

talkgroup traffic.

2

OFF

Not received

Received normally

This is the default.

3

ONLY

YES

NOT RECEIVED

Use this setting to listen to I-Calls,

 

 

 

 

and block all talkgroup reception.

 

 

 

 

For quick access to this mode,

 

 

 

 

press . (decimal) then RSM.

 

 

 

 

 

57

Page 61
Image 61
Uniden UBC3300XLT manual Moving between Scan List Memories, Call Motorola/EDACS