2. | Press TRNSFR to store the | SRCH | 12.5k |
| frequency in the channel you | 1240.0000 FM | |
| selected. The smallest empty | Range 1 | |
| channel number flashes on the | C004 | 0000.0000 |
| display. If necessary, you can also |
|
|
| change the channel by scrolling the |
|
|
| VFO. |
|
|
3. | Press E. |
|
|
Note: • If the frequency you want to store exists already, WARNING appears on the display and you will hear a beep. (See “Duplicate Frequency Alert” on page 27.)
•After storing the frequency, it moves to the Search Hold mode.
•In case there is a not a free channel, the frequency you want to store will automatically be stored in the previous channel before you entered into Chain Search mode.
4.Repeat steps 1, 2 and 3 after starting the search for all the search frequencies you want to store.
Auto Storing
The scanner automatically stores active frequencies if Auto Store feature is turned ON.
But the frequencies already stored can not be stored. To make use of this feature, set a search range first (see page 36), then enter into the Menu mode. If you start this feature without setting a search range, NO LIMIT DATA appears on the display.
1.Press MENU/BACK.
2. Select 1:SERVICE OPTION / 2:CHAIN SEARCH
/ 6:AUTO STORE by rotating the VFO and pressing E.
3.Select 1:ON by rotating the VFO and
pressing E. | AUTO STORE | |
4. Select the bank number you want to | SELECT BANK | |
| ||
use with the keypad. The selected | ||
| ||
bank number appears on the display. |
| |
Note: If the selected bank has no free | AUTO STORE | |
channels to store, CH DATA | ERROR | |
FULL will appear on the display | CH DATA FULL | |
and you will hear a beep. |
|
39
