Univex NeatDesk, NeatScan, NeatReceipts manual CalibrateT.T, CleaningTthe Neat ADF Scanner T

Models: NeatDesk NeatReceipts NeatScan

1 147
Download 147 pages 4.95 Kb
Page 140
Image 140
CalibrateT.T

3.Load the calibration sheet into the scanner as shown in the image above, and click

CalibrateT.T

If you can't find your calibration sheet, you can print a new one by clicking Print Calibration Sheet, shown in the bottom left corner of the Calibration dialog box above. If you can't print from your computer, you can also click Restore Default Calibration Values, in the bottom left corner of the dialog box.

When calibration is complete, a dialog box appears that says: "The Neat ADF scanner has been successfully calibrated." This means that the scanner has successfully carried out the process of calibration; however, if upon scanning,

you notice that your scans appear faint or don't look quite right, you may need to recalibrate.

6.Put the calibration paper back in the Welcome Kit for safe-keeping.

7.Once calibration is complete, you may resume scanning.

CleaningTthe Neat ADF Scanner T

Follow these instructions to properly handle and clean your Neat™ ADF scanner. You may also view a video tutorial atHU http://www.neatco.com/clean-scanner.UH

1.Turn off the scanner and disconnect the power cord.

2.Dampen the provided cleaning cloth with isopropyl alcohol (95%). Do NOT use water. Do NOT use abrasive cleaners.

140

Page 140
Image 140
Univex NeatDesk, NeatScan, NeatReceipts manual CalibrateT.T, CleaningTthe Neat ADF Scanner T