2.On the Quick Scan Center screen, click CalibrateT.TThe following dialog box will appear:

3.Load the calibration sheet into the scanner as shown in the image above, and

click CalibrateT.T

IfTyou can't find your calibration sheet, you can print a new one by

clicking PrintTTCalibration Sheet,TTshown in the bottom left corner of the Calibration dialog box above. If you can't print from your computer, you

can also click RestoreTTDefault Calibration Values,TTin the bottom left corner of the dialog box.T

When calibration is complete, a dialog box appears that says: "The Neat Mobile scanner has been successfully calibrated." This means that the scanner has successfully carried out the process of calibration; however, if upon scanning, you notice that your scans appear faint or don't look quite right, you may need to recalibrate.

4.Put the calibration paper back in the Welcome Kit for safe-keeping.

5.Once calibration is complete, you may resume scanning.

143

Page 143
Image 143
Univex NeatDesk, NeatScan, NeatReceipts manual 143, Click CalibrateT.T