Administration
ETV Portal Server Administrator Guide 21
3. In Select VBrick, select one or more existing VBricks for which a SAP has been received.
If you select one VBrick, this populates the VBrick Configuration panel. (If you select
multiple VBricks, it does not populate the panel; if you need to configure the VBricks,
you must add them one at a time.)
4. Complete or modify the fields in VBrick Configuration as necessary and click Submit.
This adds the new configuration to the list of configured VBricks shown on the previous
page.
Note The only time you will manually complete the VBrick Configuration fields is when
you are defining the configuration for a VBrick that will be added to the network at
a later time. In this case, you will need to know the configuration data in advance.
Host Name Required. Host name of VBrick.
IP Address Required. IP address of VBrick.
User Name Defaults to system-defined value if blank.
User Password Defaults to system-defined value if blank.
Confirm Password Defaults to system-defined value if blank. Must match User Password
if entered above.
Software Revision Optional. To get the Software Revision in Integrated Web Server
(IWS), go to Status > System Information > Release Re vision.
HTTP Port Optional. To get the HTTP Port in Integrated Web Server (IWS), go
to Configuration > System > Securit y > IWS Server Port.
VBrick Model Select from dropdown. Advanced settings are enabled if you select an
encoder or a VBStar.