Stored Broadcast

VoD Name – Select an NXG server and a source video. Then select the destination VBricks or STBs.

VBrick Name – Select a VBrick (or VBStar) and a source video. Then select the destination VBricks or STBs.

4.Configure Advanced Settings for VBricks and STBs as necessary. As noted, it is unlikely you will ever need to change these settings. In all cases you can safely ignore these settings and use the defaults provided by ETV Portal Server.

These settings generally set configuration options for source devices and destination devices (VBricks and STBs) so that they are configured properly (e.g. transmit/receive enabled/disabled) at the beginning and end of an emergency broadcast. All required devices must be present and enabled for a successful emergency broadcast. The settings differ depending on the device (e.g. MPEG-2 or -MPEG-4) you select and will include some or all of the fields shown in the table below.

34

© 2005 VBrick Systems, Inc.

Page 42
Image 42
VBrick Systems ETV v3.1 manual VBrick Systems, Inc